manualshive.com logo in svg

Extreme Networks ExtremeWare 7.7, Command Reference Manual

The Extreme Networks ExtremeWare 7.7 is a powerful networking software designed to optimize performance and enhance network security. Unlock the full potential of your network with the Command Reference Manual, available for free download on our website 88.208.23.73:8080. This comprehensive manual provides detailed instructions for maximizing the capabilities of this exceptional product.

Share
Download
background image

 

1426

ExtremeWare 7.7 Command Reference Guide

Wireless Commands

show wireless ports interface rf-status

show wireless ports [<portlist> | all] interface [1 | 2] rf-status {detail}

Description

Displays data rates for the selected port and interface. If Dynamic Frequency Selection (DFS) is used, 
the detail command output includes a list of channels on which interference is detected.

Syntax Description

Default

N/A

Usage Guidelines

Each wireless port on the Summit 300 contains two interfaces. Interface 1 supports 802.11a, and 
interface 2 supports 802.11b/g radio signals. The 

show wireless port interface rf-status 

command allows you to display information about one of the two individual interfaces (1|2) on a port 
or ports.

Examples

The following example displays RF status of all active ports of the switch:

show wireless ports all interface 1 rf-status

Port     Intf    Tx Rate         Channel         Noise Floor

--------------------------------------------------------------

1:37     1       54              64              85

1:38     1       54              64              84

The following command shows detailed RF status. The output includes a list of channels recorded in 
the no-occupancy list (NOL) due to RADAR interference for the DFS feature.

show wireless ports all interface 1 rf-status detail

Wireless Interface:       15:1

           Transmit Rate:       54

         Beacon Interval:       40

                    DTIM:       2

                Preamble:       Short

              Long Retry:       7

             Short Retry:       4

    Fragmentation Length:       2345

           RTS Threshold:       2330

portlist

Specifies one or more ports or slots and ports. Can be one or more port numbers. May be in the form 
1, 2, 1:2, 3-5, 2:*, 2:5, 2:6-2:8. 

all

Specifies all active ports.

interface

Specifies an interface: 1 or 2.

detail

Specifies to display the information in detailed format. 

Summary of Contents for ExtremeWare 7.7





























































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for ExtremeWare 7.7

Campbell PC208 Instruction Manual preview
PC208
Brand: Campbell Pages: 133
Q-See Remote Client Software V 4.0.1 User Manual preview
Remote Client Software V 4.0.1
Brand: Q-See Pages: 72
FARONICS ANTI-EXECUTABLE ENTERPRISE Manual preview
ANTI-EXECUTABLE ENTERPRISE
Brand: FARONICS Pages: 68
Campbell BMP5 Direct SDK Instruction Manual preview
BMP5 Direct SDK
Brand: Campbell Pages: 32
Imation IronKey Workspace Provisioning Tool 1.0 User Manual preview
IronKey Workspace Provisioning Tool 1.0
Brand: Imation Pages: 19
Altigen MultiSite Configurator Configuration Manual preview
MultiSite Configurator
Brand: Altigen Pages: 10
Teklynx Discover ActiveX Programmer'S Manual preview
Discover ActiveX
Brand: Teklynx Pages: 165
Fujitsu ETERNUS VSS Hardware Provider 2.1 User Manual preview
ETERNUS VSS Hardware Provider 2.1
Brand: Fujitsu Pages: 134
Fujitsu ATLAS V14 User Manual preview
ATLAS V14
Brand: Fujitsu Pages: 302
Fujitsu PFU Rack2-Filer User Manual preview
PFU Rack2-Filer
Brand: Fujitsu Pages: 463
Fujitsu Eternus web GUI User Manual preview
Eternus web GUI
Brand: Fujitsu Pages: 635
Fujitsu ETERNUS User Manual preview
ETERNUS
Brand: Fujitsu Pages: 64
Blackberry MEDIA SYNC Release Note preview
MEDIA SYNC
Brand: Blackberry Pages: 9
Blackberry ENHANCED GOOGLE MAIL PLUG IN - LEARN MORE User Manual preview
ENHANCED GOOGLE MAIL PLUG IN - LEARN MORE
Brand: Blackberry Pages: 16
Blackberry PRD-10459-003 - Enterprise Server For IBM Lotus Domino Administration Manual preview
PRD-10459-003 - Enterprise Server For IBM Lotus Domino
Brand: Blackberry Pages: 420
MACROMEDIA Director MX Use Manual preview
Director MX
Brand: MACROMEDIA Pages: 624
Red Hat DEVICE-MAPPER MULTIPATH 5.2 Configuration And Administration Manual preview
DEVICE-MAPPER MULTIPATH 5.2
Brand: Red Hat Pages: 44
Red Hat CLUSTER SUITE FOR ENTERPRISE LINUX 5.2 Overview preview
CLUSTER SUITE FOR ENTERPRISE LINUX 5.2
Brand: Red Hat Pages: 78

Brands by name

Popular brands

Load more brands