manualshive.com logo in svg

Extreme Networks ExtremeWare 7.7, Command Reference Manual

The Extreme Networks ExtremeWare 7.7 is a powerful networking software designed to optimize performance and enhance network security. Unlock the full potential of your network with the Command Reference Manual, available for free download on our website 88.208.23.73:8080. This comprehensive manual provides detailed instructions for maximizing the capabilities of this exceptional product.

Share
Download
background image

 

configure debug elsm-port

ExtremeWare 7.7 Command Reference Guide

1497

configure debug elsm-port

configure debug elsm-port <level> <port number>

Description

Configures debug tracing for Extreme Link Status Monitoring (ELSM) ports.

Syntax Description

Default

None.

Usage Guidelines

To configure debug tracing for ELSM ports, use the following command:

configure debug elsm-port <level> <port number>

The levels provide the following information:

•

Level 1 is information.

•

Level 2 is trace, and is used to trace the path of code execution.

•

Levels 3 and above are not used.

To disable debug tracing, set the level to 0.

To configure ELSM debug tracing for the entire system, use the following command:

configure debug elsm-system <level>

Example

The following command configures debug tracing of code execution (Level 2) for ELSM port 3 on the 
switch:

configure debug elsm-port 2 3

History

This command was first available in ExtremeWare 6.2.2b134.

level

Specifies the level of debug tracing:

•

0 - Level 0 disables debug tracing.

•

1 - Level 1 is information.

•

2 - Level 2 is trace, and is used to trace the path of code execution.

Levels 3 and above are not used. To disable debug tracing, set the level to 0.

port number

Specifies the ports or slots and ports for which ELSM debug tracing is being 
configured. May be in the form 1, 2, 3-5, 2:5, 2:6-2:8.

Summary of Contents for ExtremeWare 7.7





























































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for ExtremeWare 7.7

JETWAY MAGICTWINXP-R10 Software Install Manual preview
MAGICTWINXP-R10
Brand: JETWAY Pages: 43
MACROMEDIA CONTRIBUTE-USING CONTRIBUTE Use Manual preview
CONTRIBUTE-USING CONTRIBUTE
Brand: MACROMEDIA Pages: 214
MACROMEDIA ClusterCATS Use Manual preview
ClusterCATS
Brand: MACROMEDIA Pages: 156
Citrix MetaFrame MetaFrame Presentation Server Reviewer'S Manual preview
MetaFrame MetaFrame Presentation Server
Brand: Citrix Pages: 97
ALK CoPilot CoPilot Live Smartphone User Manual preview
CoPilot CoPilot Live Smartphone
Brand: ALK Pages: 42
Lucent Technologies CentreVu User Manual preview
CentreVu
Brand: Lucent Technologies Pages: 198
Extron electronics MS9200P User Manual preview
MS9200P
Brand: Extron electronics Pages: 124
Sierra Wireless Writing an embedded application loader Application Note preview
Writing an embedded application loader
Brand: Sierra Wireless Pages: 9
Sierra Wireless IP Manager Configuration Manual preview
IP Manager
Brand: Sierra Wireless Pages: 16
VBrick Systems VB Directory System User Manual preview
VB Directory System
Brand: VBrick Systems Pages: 21
VBrick Systems StreamPlayer v4.4 User Manual preview
StreamPlayer v4.4
Brand: VBrick Systems Pages: 32
AppsDaily C2 User Manual preview
C2
Brand: AppsDaily Pages: 38
Intel SMALL BUSINESS SERVER Manual preview
SMALL BUSINESS SERVER
Brand: Intel Pages: 79
Elecard AVC HD Player 5.7 User Manual preview
AVC HD Player 5.7
Brand: Elecard Pages: 39
LEI accessories MAPCREATE USA 6.3 - ADDENDUM Manual preview
MAPCREATE USA 6.3 - ADDENDUM
Brand: LEI accessories Pages: 1
FieldServer FS-8707-06 Driver Manual preview
FS-8707-06
Brand: FieldServer Pages: 15
Bay Networks MicroManager Installation Manual preview
MicroManager
Brand: Bay Networks Pages: 15
KAPERSKY ANTI-VIRUS 6.0 User Manual preview
ANTI-VIRUS 6.0
Brand: KAPERSKY Pages: 298

Brands by name

Popular brands

Load more brands