show stpd ports
ExtremeWare 7.7 Command Reference Guide
1629
The following command displays the state of slot 3, ports 1 through 3 on an STPD named
s0
on a
modular switch:
show stpd S0 ports 3:1-3:3
The results for this command are as follows:
* Alpine3804:4 # show stpd s0 ports 3:1-3:3
Port Mode State Cost Flags Priority Port ID Designated Bridge
3:1 802.1D FORWARDING 100 e------- 16 16641 00:00:00:00:00:00:00:00
3:2 802.1D FORWARDING 100 e------- 16 16642 00:00:00:00:00:00:00:00
3:3 802.1D FORWARDING 100 e------- 16 16643 00:00:00:00:00:00:00:00
Total Ports: 14
------------------------- Flags: ----------------------------
1: e=Enable, d=Disable
2: L = Loopback port
3: (Port role) R=Root, D=Designated, A=Alternate, B=Backup
4: (Config type) b=broadcast, p=point-to-point, e=edge, a=auto
5: (Oper. type) b=broadcast, p=point-to-point, e=edge
6: p=proposing, a=agree
7: (partner mode) d = 802.1d, w = 802.1w
8: i = edgeport inconsistency
The following command displays the state of port 20 on an STPD named
rstp_domain
on a standalone
switch:
show stpd rstp_domain port 20 detail
The results for this command are as follows:
Partner STP version: Dot1w
Stpd: rstp_domain Port: 20
PortId: 4014 Stp: ENABLED Path Cost: 19
Port Mode: EMISTP
Port State: BLOCKING Topology Change Ack: FALSE
Port Priority: 16 Loopback Port: FALSE
Designated Root: 80:00:00:04:96:05:00:30 Designated Cost: 0
Designated Bridge: 80:00:00:04:96:05:00:30 Designated Port Id: 400a
Edge Port SafeGuard: Enable
The following command displays the state of port 24 on an STPD named
cist_stp
on a standalone switch
with MSTP configured:
show stpd cist_stp ports 24
The results for this command are as follows:
Port Encap State Cost Flags Priority Port ID Designated Bridge
24 802.1D FORWARDING 19 e-Dbbpm-B 4 16408 80:00:00:04:96:1f:88:28
Total Ports: 2
------------------------- Flags: ----------------------------
1: e=Enable, d=Disable
2: L = Loopback port
3: (Port role) R=Root, D=Designated, A=Alternate, B=Backup, M=Master
4: (Config type) b=broadcast, p=point-to-point, e=edge, a=auto
5: (Oper. type) b=broadcast, p=point-to-point, e=edge
Summary of Contents for ExtremeWare 7.7
