manualshive.com logo in svg

Extreme Networks ExtremeWare 7.7, Command Reference Manual

The Extreme Networks ExtremeWare 7.7 is a powerful networking software designed to optimize performance and enhance network security. Unlock the full potential of your network with the Command Reference Manual, available for free download on our website 88.208.23.73:8080. This comprehensive manual provides detailed instructions for maximizing the capabilities of this exceptional product.

Share
Download
background image

 

show atm

ExtremeWare 7.7 Command Reference Guide

2175

show atm

show atm {<portlist>}

Description

This command displays ATM port status.

Syntax Description

Default

None

Usage Guidelines

You can use the optional 

portlist

 parameter to narrow the range of status information the command 

displays; otherwise, the command displays the status information for all ports.

By default, the command displays a summary of status information for the specified ports.

The summary of status information includes the following information for each port:

•

Values of all port configuration parameters

•

Port state

•

ATM statistics

The detailed status information includes the summary information plus any ATM statistics. Table 38 
describes the ATM receive statistics, and Table 39 describes the ATM transmit statistics. 

portlist

Specifies list of ports or slots and ports. May be in the form 1, 2, 3-5, 
2:5, 2:6-2:8.

Table 38:  Summary of ATM Receive Statistics 

Receive Statistics

Description

Cells Received

Number of cells received.

Cells OAM

Number of Operations, Administration, and Maintenance 
(OAM) cells received.

Cells Dropped (Congestion)

Number of cells dropped due to insufficient buffers.

Cells Dropped (Invalid VCC)

Number of cells dropped due to invalid VPI/VCI or 
AAL-5 header.

Cells Dropped (HEC)

Number of cells dropped with Header Error Control 
(HEC) errors. HEC is an 8 bit cyclic redundancy check 
(CRC) computed on all fields in an ATM header and 
capable of detecting bit errors. HEC is used for cell 
delineation.

PDUs Received

Number of PDUs received.

PDUs Dropped (CRC)

Number of PDUs discarded due to CRC-32 errors.

Summary of Contents for ExtremeWare 7.7





























































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for ExtremeWare 7.7

NEC AccuSync LCD52V White Paper preview
AccuSync LCD52V
Brand: NEC Pages: 5
3Com IntelliJack NJ200 Supplementary Manual preview
IntelliJack NJ200
Brand: 3Com Pages: 14
AMX RMS Administrator'S Manual preview
RMS
Brand: AMX Pages: 212
Omron CX_PROFIBUS Brochure preview
CX_PROFIBUS
Brand: Omron Pages: 2
Sling Media Slingbox User Manual preview
Slingbox
Brand: Sling Media Pages: 112
Dell External OEMR 2800 Deployment Manual preview
External OEMR 2800
Brand: Dell Pages: 32
Dell Encryption Key Manager Setup Manual preview
Encryption Key Manager
Brand: Dell Pages: 66
Dell External OEMR 2950 Deployment Manual preview
External OEMR 2950
Brand: Dell Pages: 22
Dell Jog Shuttle Manual preview
Jog Shuttle
Brand: Dell Pages: 10
Dell DVS Simplified Appliance Reference preview
DVS Simplified Appliance
Brand: Dell Pages: 73
Dell Latitude E6540 Owner'S Manual preview
Latitude E6540
Brand: Dell Pages: 75
Dell External OEMR 850 User Manual preview
External OEMR 850
Brand: Dell Pages: 162
Dell External OEMR 2850 User Manual preview
External OEMR 2850
Brand: Dell Pages: 176
ACTi Network Video Recorder User Manual preview
Network Video Recorder
Brand: ACTi Pages: 132
Red Hat DEVICE-MAPPER MULTIPATH 5.2 Configuration And Administration Manual preview
DEVICE-MAPPER MULTIPATH 5.2
Brand: Red Hat Pages: 44
Red Hat CLUSTER SUITE FOR ENTERPRISE LINUX 5.2 Overview preview
CLUSTER SUITE FOR ENTERPRISE LINUX 5.2
Brand: Red Hat Pages: 78
Lowrance Elite 5 Operation Manual preview
Elite 5
Brand: Lowrance Pages: 48
Intel Solid-State Drive Toolbox User Manual preview
Solid-State Drive Toolbox
Brand: Intel Pages: 32

Brands by name

Popular brands

Load more brands