2388
ExtremeWare 7.7 Command Reference Guide
Power Over Ethernet Commands—Summit 300 and 400-24p Switches and Alpine PoE Module
show inline-power configuration port
show inline-power configuration port <portlist>
Description
Displays inline power configuration information for the specified ports.
NOTE
This command is available only for the Alpine FM-32Pi PoE Module and the Summit 300-48 switch.
Syntax Description
Default
N/A
Usage Guidelines
The output displays the following inline power configuration information for the specified ports:
•
Config—Indicates whether the port is enabled to provide power:
—
Enabled: The port is available to provide power.
—
Disabled: The port is not available to provide power.
•
Detect—Indicates the detect level:
—
Auto: The port will power up if there is enough available power.
—
Test: The port will not power up. Indicates a test mode to determine whether the port can be
discovered.
•
Rsvd Pwr—Displays the amount of configured reserved power in watts.
•
Oper Lmt—Displays the configured operator limit in watts. The operator limit is used only with
violation precedence.
•
Viol Prec—Displays the violation precedence settings:
—
ADVERTISED-LIMIT: Removes or denies power if an IEEE 802.3af-compliant powered device
(PD) consumes power beyond its advertised class limit.
—
OPERATOR-LIMIT: Removes or denies power if the PD consumes power beyond the configured
operator limit.
—
MAX-CLASS-OPERATOR: Removes or denies power if the PD consumes power beyond the
maximum of the detected class limit or the operator limit.
—
NONE: Removes or denies power if the PD consumes power in excess of the regulatory
maximum allowable wattage.
•
Label—Displays a text string, up to 13 characters in length, associated with the port.
portlist
Specifies one or more slots and ports. On a modular switch, can be a list of slots and ports. On a
stand-alone switch, can be one or more port numbers. May be in the form 1, 2, 3-5, 1:*, 1:5, 1:6-1:8.
Summary of Contents for ExtremeWare 7.7
