Extreme Networks ExtremeWare 7.7 Command Reference Manual Download

Page: 330 / 2620

330

ExtremeWare 7.7 Command Reference Guide

Commands for Configuring Slots and Ports on a Switch

show msm-failover

Description

Displays hitless failover statistics.

NOTE

This command is available only on the BlackDiamond switches.

Syntax Description

This command has no arguments or variables.

Default

N/A

Usage Guidelines

None

Example

The following command displays MSM failover statistics:

show msm-failover

The output displays the following:

•

Current state of the MSM

•

Software image information (primary/secondary image, version)

•

Cause of the last failover

•

Failover configuration (link action, preserve state, slave configuration, timeout)

•

ESRP failover mode

•

Failover status for the supported subsystems (configuration, layer 2 hardware, layer 3 hardware, STP,
EAPS, ARP, ESRP)

Each of the supported subsystems display one of the following states:

—

disable—Hitless failover is disabled. This is also the initial state.

—

initial—Hitless failover is enabled, but the downloading of the subsystem state has not yet started
for a particular subsystem.

—

xfr—The subsystem’s state is in the process of being transferred to the slave. The state transfer
includes all of the state for that subsystem.

—

ready—The subsystem has received its state download. In the ready state, it may receive updates
to its internal states.

—

failed—The subsystem encountered a failure. To clear the failure, reboot the slave MSM.

Summary of Contents for ExtremeWare 7.7





























































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for ExtremeWare 7.7

Reviews:

Related manuals for ExtremeWare 7.7

Brands by name

Popular brands

Extreme Networks ExtremeWare 7.7, Command Reference Manual

Search results

Summary of Contents for ExtremeWare 7.7

Reviews:

Related manuals for ExtremeWare 7.7

Brands by name

Popular brands