348
ExtremeWare 7.7 Command Reference Guide
Commands for Configuring Slots and Ports on a Switch
The following examples show the output from the show ports utilization command for all ports on the
switch. The three displays show the information presented when you use the spacebar to toggle
through the display types. The first display shows utilization in terms of packets:
Link Utilization Averages Wed Jan 23 21:29:45 2004
Port Link Receive Peak Rx Transmit Peak Transmit
Status packet/sec pkt/sec pkt/sec pkt/sec
=====================================================================================
1 A 43 255 4 14
2 R 0 0 0 0
3 R 0 0 0 0
4 R 0 0 0 0
5 R 0 0 0 0
6 R 0 0 0 0
7 R 0 0 0 0
8 R 0 0 0 0
================================================================================
Link Status: A-Active R-Ready D-Disabled NP-Not Present LB-Loopback
spacebar->toggle screen U->page up D->page down ESC->exit
The second display shows utilization in terms of bytes:
Link Utilization Averages Wed Jan 23 21:30:03 2002
Port Link Receive Peak Rx Transmit Peak Transmit
Status bytes/sec bytes/sec bytes/sec bytes/sec
==========================================================================
1 A 1102 69555 536 2671
2 R 0 0 0 0
3 R 0 0 0 0
4 R 0 0 0 0
5 R 0 0 0 0
6 R 0 0 0 0
7 R 0 0 0 0
8 R 0 0 0 0
===========================================================================
Link Status: A-Active R-Ready D-Disabled NP-Not Present
The third display shows bandwidth utilization:
Link Utilization Averages Wed Jan 23 21:30:19 2002
Port Link Link Receive Peak Rx Transmit Peak Transmit
Status Speed % bandwidth % bandwidth % bandwidth % bandwidth
================================================================================
1 A 100 0.00 0.60 0.00 0.02
2 R 0.00 0.00 0.00 0.00
3 R 0.00 0.00 0.00 0.00
4 R 0.00 0.00 0.00 0.00
5 R 0.00 0.00 0.00 0.00
6 R 0.00 0.00 0.00 0.00
7 R 0.00 0.00 0.00 0.00
8 R 0.00 0.00 0.00 0.00
================================================================================
Link Status: A-Active R-Ready D-Disabled NP-Not Present
Summary of Contents for ExtremeWare 7.7
