Extreme Networks ExtremeWare 7.7 Command Reference Manual Download

Page: 614 / 2620

614

ExtremeWare 7.7 Command Reference Guide

SLB Commands—“i” Series Switches Only

enable slb

Description

Enables SLB processing.

Syntax Description

This command has no arguments or variables.

Default

SLB is disabled by default.

Usage Guidelines

This command activates the following functions for transparent, translational, and port translation
modes:

•

Exporting of VIP routes or proxy ARP for VIP addresses.

•

Processing of VIP lookup and connection setup.

•

Establishing communication with redundant SLB switches.

•

Positively responding to MIB, 3DNS, and SeeIT requests.

Before you enable SLB, enable IP forwarding on the associated VLANs.

NOTE

SLB cannot be enabled when MPLS or Destination-sensitive accounting is enabled or SLPM is active.

Example

The following command enables SLB:

enable slb

History

This command was first available in ExtremeWare 6.1.

This command was updated in an ExtremeWare IP Technology Services Release based on v6.1.8b12.

This command was modified in ExtremeWare 7.0.0.

Platform Availability

This command is available on all “

” series platforms.

Summary of Contents for ExtremeWare 7.7





























































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for ExtremeWare 7.7

Reviews:

Related manuals for ExtremeWare 7.7

Brands by name

Popular brands

Extreme Networks ExtremeWare 7.7, Command Reference Manual

Search results

Summary of Contents for ExtremeWare 7.7

Reviews:

Related manuals for ExtremeWare 7.7

Brands by name

Popular brands