Extreme Networks ExtremeWare 7.7 Command Reference Manual Download

Page: 78 / 2620

ExtremeWare 7.7 Command Reference Guide

Commands for Accessing the Switch

configure account password-policy char-validation

configure account [all | <name>] password-policy char-validation [none |

all-char-groups]

Description

Requires that the user include an upper-case letter, a lower-case letter, a digit, and a symbol in the
password.

Syntax Description

Default

N/A

Usage Guidelines

This feature is disabled by default.

Once you issue this command, each password must include at least

two

characters of each of the

following four types:

•

Upper-case A-Z

•

Lower-case a-z

•

0-9

•

!, @, #, $, %, ^, *, (, )

The minimum number of characters for these specifically formatted passwords is 8 characters and the
maximum is 32 characters.

Use the

none

option to reset the password to accept all formats.

Example

The following command requires all users to use this specified format for all passwords:

configure account all password-policy char-validation all-char-groups

History

This command was first available in ExtremeWare 7.4.

all

Specifies all users (and future users).

name

Specifies an account name.

none

Resets password to accept all formats.

all-char-groups

Specifies that the password must contain at least two characters from each of the four
groups.

NOTE: The password minimum length will be 8 characters if you specify this option.

Summary of Contents for ExtremeWare 7.7





























































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for ExtremeWare 7.7

Reviews:

Related manuals for ExtremeWare 7.7

Brands by name

Popular brands

Extreme Networks ExtremeWare 7.7, Command Reference Manual

Search results

Summary of Contents for ExtremeWare 7.7

Reviews:

Related manuals for ExtremeWare 7.7

Brands by name

Popular brands