show ports stats
ExtremeWare 7.7 Command Reference Guide
815
•
Received Byte Count (RX Byte Count)—The total number of bytes that were received by the port,
including bad or lost frames. This number includes bytes contained in the Frame Check Sequence
(FCS), but excludes bytes in the preamble.
•
Received Broadcast (RX Bcast)—The total number of frames received by the port that are addressed
to a broadcast address.
•
Received Multicast (RX Mcast)—The total number of frames received by the port that are addressed
to a multicast address.
For version 2.0 and 4.0
•
Disabled and Not Present are not available as link status indicators.
•
Chassis is available as a link status indicator. If chassis is listed, the link is connected to a Summit
Virtual Chassis.
Examples
The following command displays port statistics for ports 1 through 3 on a stand-alone switch:
show ports 1-3 stats
The following command displays port statistics for slot 1, ports 1 through 3 on a modular switch:
show ports 1:1-1:3 stats
The following command displays port statistics for all ports:
show ports stats
The output produced by the
show ports stats
command is similar to the following:
Port StatisticsThu Jul 8 09:50:50 2004
PortLinkTx PktTx ByteRx PktRx ByteRxRx
StatusCountCountCountCountBcastMcast
================================================================================
1:1A
740131616712112013101702324273963
1:2A
292131246865338965161833433913721456
1:3A
3727343513183757847213133621551
1:4R
0
0
0
0
0
0
1:5R
0
0
0
0
0
0
1:6A
10993758581196290130644217541
1:7R
0
0
0
0
0
0
1:8A
1099375858000 0
The following command displays cable diagnostics information for all ports:
show ports stats cable-diagnostics
The output produced by the
show ports stats cable-diagnostics
command is similar to the
following:
Port StatisticsThu Jul 8 09:52:19 2004
PortLinkNumDiagsDiagsDiags
StatusDiagsSuccessFailChange
================================================================================
1:1A
0
0
0
0
1:2A
1
1
0
0
1:3A
0
0
0
0
1:4R
0
0
0
0
Summary of Contents for ExtremeWare 7.7
