manualshive.com logo in svg

Extreme Networks ExtremeWare 7.7, Command Reference Manual

The Extreme Networks ExtremeWare 7.7 is a powerful networking software designed to optimize performance and enhance network security. Unlock the full potential of your network with the Command Reference Manual, available for free download on our website 88.208.23.73:8080. This comprehensive manual provides detailed instructions for maximizing the capabilities of this exceptional product.

Share
Download
background image

 

configure route-map add set

ExtremeWare 7.7 Command Reference Guide

909

configure route-map add set

configure route-map <route-map> <seq_number> add set [as-path <as_number> | 

community [[access-profile <access-profile> | <as_number>:<number> | number 

<community> | no-advertise | no-export | no-export-subconfed] | remove | 

[add | delete] [access-profile <access-profile> | <as no> : <number> | 

number <community> | no-advertise | no-export | no-export-subconfed]] | 

next-hop <ip address> | med [internal | <med_number> | remove | [add | 

delete] <med_number>] local-preference <number> | weight <number> | origin 

[igp | egp | incomplete] | tag <tag_number> | accounting index 

<index_number> value <value_number> | cost <number> | cost-type [ase-type-1 

| ase-type-2]]

Description

Configures a route map 

set

 entry.

NOTE

This command is available only on the “i” series switches.

Syntax Description

route-map

The name of the route map to which this statement should be added.

seq-number

Specifies the sequence number of the entry in the route map to which this 
statement should be added.

as_number

Prepends the specified AS number to the AS path in the path attribute.

as_access_profile

Sets the community in the path attribute to the specified access profile.

as_number:number

Sets the community in the path attribute to the specified BGP community 
number, specified in as_number:number format, in the path attribute.

community

Sets the community in the path attribute to the specified BGP community 
number, specified as an unsigned 32-bit integer in decimal format.

no-export

Sets the community in the path attribute to the no-export attribute.

no-advertise

Sets the community in the path attribute to the no-advertise attribute.

no-export-subconfed

Sets the community in the path attribute to the no-export-subconfed attribute. 

remove

Removes the community attribute, if present.

add | delete <as_access_profile>

Adds or deletes the specified access profile to or from the existing community 
in the path attribute.

add | delete 
<as_number:number>

Adds or deletes the specified BGP community number, specified in 
as_number:number format, to or from the existing community in the path 
attribute.

add | delete <community>

Adds or deletes the specified BGP community number, specified as an 
unsigned 32-bit integer in decimal format, to or from the existing community in 
the path attribute.

add | delete <no-export>

Adds or deletes the no-export attribute to or from the existing community in 
the path attribute. 

add | delete <no-advertise>

Adds or deletes he no-advertise attribute to or from the existing community in 
the path attribute.

add | delete 
<no-export-subconfed>

Adds or deletes the no-export-subconfed attribute to or from the existing 
community in the path attribute. 

Summary of Contents for ExtremeWare 7.7





























































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for ExtremeWare 7.7

Xtore XN200 series XN-004-A1 User Manual preview
XN200 series XN-004-A1
Brand: Xtore Pages: 4
Xtore XN200 series XN-004-A1 Software Manual preview
XN200 series XN-004-A1
Brand: Xtore Pages: 7
MACROMEDIA COLDFUSION MX 61-CFML Quick Reference preview
COLDFUSION MX 61-CFML
Brand: MACROMEDIA Pages: 34
AVIRA SECURITY MANAGEMENT CENTER 2.5 Manual preview
SECURITY MANAGEMENT CENTER 2.5
Brand: AVIRA Pages: 39
KAPERSKY ANTI-VIRUS 5.5 - FOR NOVELL NETWARE Administrator'S Manual preview
ANTI-VIRUS 5.5 - FOR NOVELL NETWARE
Brand: KAPERSKY Pages: 134
HP SysMan User Manual preview
SysMan
Brand: HP Pages: 15
HP Surestore 5200ex - Optical Disk Drives User Manual preview
Surestore 5200ex - Optical Disk Drives
Brand: HP Pages: 77
HP T9576G06 Management Manual preview
T9576G06
Brand: HP Pages: 778
ACRONIS BACKUP AND RECOVERY 10 SERVER FOR LINUX - Installation Manual preview
BACKUP AND RECOVERY 10 SERVER FOR LINUX -
Brand: ACRONIS Pages: 14
ACRONIS Backup & Recovery 10 Advanced Editions Quick Start Manual preview
Backup & Recovery 10 Advanced Editions
Brand: ACRONIS Pages: 10
RedMoon Music maxWerk User Manual preview
maxWerk
Brand: RedMoon Music Pages: 74
DigiDesign Focusrite d2 Manual preview
Focusrite d2
Brand: DigiDesign Pages: 39
Juniper TePM Agent Release Note preview
TePM Agent
Brand: Juniper Pages: 9
Royal Registerlink User Manual preview
Registerlink
Brand: Royal Pages: 30
UNIBLUE DRIVERSCANNER Quick Start Manual preview
DRIVERSCANNER
Brand: UNIBLUE Pages: 3
Autodesk 256B1-05A761-1301 - AutoCAD Revit Structure Suite 2010 User Manual preview
256B1-05A761-1301 - AutoCAD Revit Structure Suite 2010
Brand: Autodesk Pages: 1638
Baby Lock Baby Lock Embroidery Professional PLUS Instructions preview
Baby Lock Embroidery Professional PLUS
Brand: Baby Lock Pages: 5
MACROMEDIA 38000382 - Macromedia JRun - Mac Getting Started Manual preview
38000382 - Macromedia JRun - Mac
Brand: MACROMEDIA Pages: 132

Brands by name

Popular brands

Load more brands