Extreme Networks ExtremeWare 7.7 Command Reference Manual Download

Page: 946 / 2620

946

ExtremeWare 7.7 Command Reference Guide

Security Commands

configure tacacs-accounting server

configure tacacs-accounting [primary | secondary] server [<ipaddress> |

<hostname>] {<tcp_port>} client-ip <ipaddress>

Description

Configures the primary and secondary accounting servers.

Syntax Description

Default

Unconfigured

Usage Guidelines

You can use the same server for accounting and authentication.

Use this command to specify the accounting server information for up to two primary and
two secondary accounting servers.

Use of the

hostname

parameter requires that DNS be enabled.

To remove a server, use the following command:

unconfigure tacacs

Example

The following command configures server tacacs1 as the primary accounting server for client
switch 10.10.20.35:

configure tacacs-accounting primary server tacacs1 client-ip 10.10.20.35

History

This command was first available in ExtremeWare 6.1.

This command was added to the Summit “

” series of switches in ExtremeWare 7.3e.

Platform Availability

This command is available on all platforms.

primary

Configures the primary accounting server.

secondary

Configures the secondary accounting server.

ipaddress

Specifies the IP address of the server being configured.

hostname

Specifies the host name of the server being configured. Must be able to be resolved
to an IP address.

tcp_port

Specifies the TCP port to use to contact the server.

ipaddress

The IP address used by the switch to identify itself when communicating with the
accounting server.

Summary of Contents for ExtremeWare 7.7





























































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for ExtremeWare 7.7

Reviews:

Related manuals for ExtremeWare 7.7

Brands by name

Popular brands

Extreme Networks ExtremeWare 7.7, Command Reference Manual

Search results

Summary of Contents for ExtremeWare 7.7

Reviews:

Related manuals for ExtremeWare 7.7

Brands by name

Popular brands