Product Overview
on page 10
on page 11
on page 11
The AP310i/e access points are indoor model 802.11ax access points. The “i” in AP310i indicates that the
access point comes with internal antennas, and the “e” indicates that it comes with external antenna
connectors. The access points feature built-in dual-band radios, two band-locked radios, four WiFi
internal or external antennas, and one Bluetooth Low Energy (BLE) antenna.
The AP310i/e is mounted on a flat surface such as a wall, a solid flat ceiling, or to a junction or gang box,
and can be installed on a suspended or drop ceiling.
Note
The AP310i/e requires a minimum base firmware of WiNG 7.3.1.
In this document, the access points are addressed as AP310i/e when the product features and
installation procedures are the same for both access points.
AP310i/e Features
The AP310i/e access points have the following features:
•
Radios:
◦
Two 802.11ax radios (one 2×2 2.4 GHz and 5 GHz radio, and one 2×2 5 GHz radio)
◦
One IoT radio (2.4 GHz)
•
Console port: RJ45
•
Two, one gigabyte Ethernet ports
◦
GE1 port
◦
GE2 port
•
LED indicators: Six
All LED indicators will be powered on during reset.
•
One reset button
•
One Kensington lock
ExtremeWireless™ AP310i/e Access Points
9
DRAFT
