3
Extreme Networks Wireless AP3825 Installation Guide
About This Guide
The guide describes how to mount and connect cables to the Extreme Networks Wireless
AP3825 access point. In addition, this guide provides information on the product
certifications and national approvals for the WS-AP3825 access point.
Who Should Use This Guide
How to Use This Guide
Read through this guide completely to familiarize yourself with its contents and to gain an
understanding of the features and capabilities of the WS-AP3825 access point. A general
working knowledge of data communications networks is helpful when setting up this
product.
This preface provides an overview of this guide, defines the conventions used in this
document, and instructs how to obtain technical support from Extreme Networks. To locate
information about various subjects in this guide, refer to the following table.
NOTE
This guide does not provide information on configuration of the access points.
For information on how to configure the access points, see the Extreme
Networks Wireless Convergence Software User Guide.
Electrical Hazard:
Only qualified personnel should install or service this unit.
Riesgo Electrico: Nada mas personal capacitado debe de instalar o darle servicio a
esta unida.
Elektrischer Gefahrenhinweis: Installationen oder Servicearbeiten sollten nur durch
ausgebildetes und qualifiziertes Personal vorgenommen werden.
For...
Refer to
...
An overview of the WS-AP3825 features.
Instructions to mount the WS-AP3825, connect
cables, and connect power. Instructions are also
included to mount and connect the optional Power
Supply.
Specifications, environmental requirements, and
physical properties of the WS-AP3825 and optional
Power Supply.
Regulatory certifications and national approvals.
