background image

External Redundant Power Supply Options

The following redundant power supplies are available for purchase from 
Extreme Networks for connection to the non-PoE Summit X450-G2 
Series 

switches:

The AC redundant power supply (Part # 10929, Model: TG11-0156-01), 
which is capable of providing power to a fully-loaded non-PoE 
switch.

The EPS-C2 redundant power supply chassis (Part # 10936), to 
which you can install up to three Summit 750W AC power supplies 
(Part # 10931). You must use the EPS-CBL-2x7 cable (Part # 10939) 
to connect the power supply to the switch.

Getting Help

For additional support related to Summit X450-G2 Series switches or 
this document, contact Extreme Networks using one of the following 
methods:

Notice 

Copyright © 2014 Extreme Networks, Inc. All Rights Reserved.

Legal Notices

Extreme Networks, Inc., on behalf of or through its wholly-owned subsidiary, 
Enterasys Networks, Inc., reserves the right to make changes in 
specifications and other information contained in this document and its 
website without prior notice. The reader should in all cases consult 
representatives of Extreme Networks to determine whether any such 
changes have been made.
The hardware, firmware, software or any specifications described or referred 
to in this document are subject to change without notice.

Trademarks

Extreme Networks and the Extreme Networks logo are trademarks or 
registered trademarks of Extreme Networks, Inc. in the United States and/or 
other countries. 
All other names (including any product names) mentioned in this document 
are the property of their respective owners and may be trademarks or 
registered trademarks of their respective companies/owners.
For additional information on Extreme Networks trademarks, please see: 

www.extremenetworks.com/company/legal/trademarks/

Warranty

Warranty information for X450-G2 series switches is located online at:

www.extremenetworks.com/go/warranty

Support

For product support, including documentation, visit:

http://support.extremenetworks.com/

Contact

Extreme Networks, Inc. 
145 Rio Robles
San Jose, CA 95134
Tel: +1 408-579-2800
Toll-free: +1 888-257-3000

Regulatory and Compliance Information

Federal Communications Commission (FCC) Notice

This device complies with Part 15 of the FCC rules. Operation is subject to 
the following two conditions: (1) this device may not cause harmful 
interference, and (2) this device must accept any interference received, 
including interference that may cause undesired operation.

NOTE:

This equipment has been tested and found to comply with the limits 

for a class A digital device, pursuant to Part 15 of the FCC rules. These limits 
are designed to provide reasonable protection against harmful interference 
when the equipment is operated in a commercial environment. This 
equipment uses, generates, and can radiate radio frequency energy and if 
not installed in accordance with the operator’s manual, may cause harmful 
interference to radio communications. Operation of this equipment in a 
residential area is likely to cause interference in which case the user will be 
required to correct the interference at his own expense.

WARNING:

Changes or modifications made to this device which are not 

expressly approved by the party responsible for compliance could void the 
user’s authority to operate the equipment.

Note: 

X450-G2 Series switches do not support back-to-front power 

supplies.

Note: 

The PoE+ Summit X450-G2 Series switches have dual hot 

swappable power supplies for power redundancy.

World Wide Web

 http://support.extremenetworks.com/

Phone

1-800-872-8440 (toll-free in U.S. and Canada) 
or 1-603-952-5000
For the Extreme Networks Support toll-free number 
in your country: 

www.extremenetworks.com/support/contact/

The latest image 
and release notes

 http://support.extremenetworks.com/

Industry Canada Notice

This digital apparatus does not exceed the class A limits for radio noise 
emissions from digital apparatus set out in the Radio Interference 
Regulations of the Canadian Department of Communications.
Le présent appareil numérique n’émet pas de bruits radioélectriques 
dépassant les limites applicables aux appareils numériques de la class A 
prescrites dans le Règlement sur le brouillage radioélectrique édicté par le 
ministère des Communications du Canada.

Class A ITE Notice

WARNING:

This is a Class A product. In a domestic environment this 

product may cause radio interference in which case the user may be 
required to take adequate measures. 

Klasse A ITE Anmerkung 

WARNHINWEIS

: Dieses Produkt zählt zur Klasse A ( Industriebereich ). In 

Wohnbereichen kann es hierdurch zu Funkstörungen kommen, daher sollten 
angemessene Vorkehrungen zum Schutz getroffen werden. 

Product Safety

This product complies with the following: UL 60950-1, FDA 21 CFR 1040.10 
and 1040.11, CAN/CSA-C22.2 No. 60950-1, EN 60950-1, EN 60825-1, EN 
60825-2, IEC 60950-1, 2006/95/EC.

Produktsicherheit

Dieses Produkt entspricht den folgenden Richtlinien: UL 60950-1, FDA 21 CFR 1040.10 and 

1040.11, CAN/CSA-C22.2 No. 60950-1, EN 60950-1, EN 60825-1, EN 60825-2, IEC 60950-

1, 2006/95/EC.

Korea EMC Statement

Electromagnetic Compatibility (EMC)

This product complies with the following: FCC 47 CFR Part 15 (Class A), 
ICES-003 (Class A), EN 55022 (Class A), EN 55024, EN 61000-3-2, EN 
61000-3-3, AS/NZS CISPR 22 (Class A), VCCI V-3, 2004/108/EC (EMC 
Directive)

Elektro-magnetische Kompatibilität (EMC)

Dieses Produkt entspricht den folgenden Richtlinien: FCC 47 CFR Part 15 
(Class A), ICES-003 (Class A), EN 55022 (Class A), EN 55024, EN 61000-3-2, 
EN 61000-3-3, AS/NZS CISPR 22 (Class A), VCCI V-3, 2004/108/EC (EMC 
Directive)

VCCI Notice

This is a class A product based on the standard of the Voluntary Control 
Council for Interference by Information Technology Equipment (VCCI). If this 
equipment is used in a domestic environment, radio disturbance may arise. 
When such trouble occurs, the user may be required to take corrective 
actions.

BSMI EMC Statement — Taiwan

This is a class A product. In a domestic environment this product may cause 
radio interference in which case the user may be required to take adequate 
measures.

Battery Warning — Taiwan

Battery Notice

Hazardous Substances

This product complies with the requirements of Directive 2011/65/EU of the 
European Parliament and of the Council of 8 June 2011 on the restriction of 
the use of certain hazardous substances in electrical and electronic 
equipment.

European Waste Electrical and Electronic Equipment (WEEE) 

Notice

In accordance with Directive 2012/19/EU of the European Parliament on 
waste electrical and electronic equipment (WEEE):

1

The symbol above indicates that separate collection of electrical and 
electronic equipment is required.

2

When this product has reached the end of its serviceable life, it cannot be 
disposed of as unsorted municipal waste. It must be collected and treated 
separately.

3

It has been determined by the European Parliament that there are 
potential negative effects on the environment and human health as a 
result of the presence of hazardous substances in electrical and electronic 
equipment.

4

It is the users’ responsibility to utilize the available collection system to 
ensure WEEE is properly treated.
For information about the available collection system, please contact 
Extreme Customer Support at +353 61 705500 (Ireland).

Safety

Compliant with IEC 60950-1:2005 (Second Edition); Am1:2009 + Am2:2013, 
EN 60950-1:2006 + A1:2010 + A11:2009 + A12:2011 + A2:2013, UL 62950-1, 2nd 
Ed. 2011, CSA C22.2 No. 60950-1-07, 2nd Ed. 2011

Warning: 

This product contains a battery used to maintain product 

information. If the battery should need replacement it must be 
replaced by Service Personnel. Please contact Technical Support for 
assistance.
Risk of explosion if battery is replaced by an incorrect type. Dispose 
of expended battery in accordance with local disposal regulations. 

Avertissements: 

Ce produit renferme une pile servant à conserver 

les renseignements sur le produit. Le cas échéant, faites remplacer la 
pile par le personnel du service de réparation. Veuillez communiquer 
avec l’assistance technique pour du soutien.
Il y a risque d’explosion si la pile est remplacée par un type de pile 
incorrect. Éliminez les piles usées en conformité aux règlements 
locaux d'élimination des piles.

 

SUPPLEMENT TO PRODUCT INSTRUCTIONS 

(Parts) 

(Hazardous Substance) 

 

 

 

 

 

 

(Metal Parts)

 

 

 

 

 

 

 

(

Circuit Modules)

 

 

 

 

 

 

 

(

Cables & Cable Assemblies)

 

 

 

 

 

 

 

葈 ’

XI

鉻 ’ 誂

蘟蕆I

(Power Adapter/Power 

Supply) 

 

 

 

 

 

 

 

SJ/T 11363-2006   

 

Indicates that the concentration of the hazardous substance in all homogeneous materials in the parts is 
below the relevant threshold of the SJ/T 11363-2006 standard. 

 

 

SJ/T 11363-2006 

 

Indicates that the concentration of the hazardous substance of at least one of all homogeneous 
materials in the parts is above the relevant threshold of the SJ/T 11363-2006 standard.

This table shows where these substances may be found in the supply chain of

 

Extreme electronic information 

products, as of the date of sale of the enclosed product.  Note that some of the component types listed above 
may or may not be a part of the enclosed product. 

 

 

The Environmentally Friendly Use Period (EFUP) for all enclosed products and their parts 
are per the symbol shown here, unless otherwise marked.  Certain parts may have a 
different EFUP (for example, battery modules) and so are marked to reflect such.  The 
Environmentally Friendly Use Period is valid only when the product is operated under the 
conditions defined in the product manual. 

50 

Extreme Networks 
Summit X450-G2 
Series Switches

Quick Reference

Summit X450-G2-24t-GE4 
Summit X450-G2-24t-10GE4 
Summit X450-G2-48t-GE4 
Summit X450-G2-48t-10GE4 
Summit X450-G2-24p-GE4 
Summit X450-G2-24p-10GE4 
Summit X450-G2-48p-GE4 
Summit X450-G2-48p-10GE4 

P/N 121110-00

Reviews: