+/- 20 min.
+/- 5 min.
english 5
Insert the Inumbrina parasol in the Abachus anchor tube
and fasten it by turning the adjusting screw clockwise.
Always tighten the adjusting screw until the Inumbrina
can no longer revolve on its axle.
ATTENTION
: It is only possible to combine Inumbrina
25 with the Abachus.
ASSEMBLY INUMBRINA INTO ABACHUS
WHAT YOU NEED
1 person
1. Fasten the (table) anchor tube to
the base plate using the provided
bolts and blind nuts, as shown on
the drawing. The tabletop should
be assembled in the same way.
Always make sure that the two
handles are situated one above the
other and that the adjusting screw
is hidden under the tabletop.
2.
Insert the Inumbrina parasol
in the anchor tube and fasten it
by turning the adjusting screw
clockwise. Always tighten
the adjusting screw until the
InUmbrina can no longer revolve
on its axle.
ASSEMBLY INUMBRINA ON BASE PLATE
WHAT YOU NEED
1 person
no. 4 hex key
no. 10 spanner
Summary of Contents for INUMBRINA
Page 38: ...tools for togetherness ...
Page 39: ......