The Extricom EXWO-404 WLAN System User Guide
33
Field
Description
Transmission Key
Select the WEP64/WEP128 key to be used for transmitting the
data from the AP.
WPA
The WPA area is only enabled if the cipher selected in the
Choose
Method
field is WPA TKIP.
WPA-PSK
If WPA with Pre-Shared key authentication is used, the
WPA-PSK field is enabled. In this case, select one of the
following input formats, and enter the corresponding key listed:
For ASCII, enter 8-63 characters.
For HEX, enter 64 digits.
WPA/Radius
Re-key Interval
Enter the amount of time (in seconds) that elapses before the
Group Key is changed.
Radius
Define the Radius server parameters if:
The cipher is WEP64/WEP128, and the 802.1x authentication
method is selected.
The cipher is TKIP, and the WPA (Radius) authentication
method is selected.
Server Address
Enter the address of the Radius server.
Server Port
Enter the Radius server port.
Server Password
Enter the Radius server password.
4.
Click
Update
to save the configuration.
The new configuration only takes effect after rebooting the switch (refer to
Rebooting the Extricom Switch
on page 37).
Advanced Configuration of the Extricom WLAN
Architecture
The advanced configuration for the Extricom WLAN architecture includes configuring the
following:
SNMP parameters.
To configure the Advanced Features parameters:
1.
Click
Advanced Features
in the navigation tree. The
Advanced
configuration page appears
(refer to
Figure 14
).
Summary of Contents for EXSW-400
Page 1: ...Version 1 0 THE EXTRICOM WLAN SYSTEM WIRELESS OFFICE EDITION EXWO 404 USER GUIDE ...
Page 4: ......
Page 20: ......