FCC Class A Notice
This equipment has been tested and found to comply with the limits for a Class A digital
device, pursuant to part 15 of the FCC rules. The Class A limits provide reasonable
protection against harmful interference when the equipment is operated in a commercial
environment. This equipment generates, uses, and can radiate radio frequency energy and,
if not installed and used in accordance with the instruction manual, may cause harmful
interference to radio communications. Operation of this equipment in a residential area is
likely to cause interference. This interference must be corrected at the expense of the user.
ATTENTION:
•
The Twisted Pair Extension technology works with unshielded twisted pair (UTP)
or shielded twisted pair (STP) cables;
but to ensure FCC Class A and CE
compliance, STP cables and STP Connectors are required
.
•
La technologie extension paires torsadées fonctionne avec les câbles paires
torsadées blindées (UTP) ou non blindées (STP). Afin de s’assurer de la
compatibilité entre FCC Classe A et CE, les câbles STP et les connecteurs STP
sont nécessaires.
NOTES:
•
This unit was tested with shielded I/O cables on the peripheral devices. Shielded
cables must be used to ensure compliance with FCC emissions limits.
•
For more information on safety guidelines, regulatory compliances, EMI/EMF
compatibility, accessibility, and related topics, see the
on the Extron website.
•
Laser products see NOTE on next page
VCCI-A Notice
Summary of Contents for 60-1474-11
Page 2: ......
