AVT 200HD Tuner • Remote Configuration and Control
68
Starting the Software
To run the AVT 200HD Configuration & Control Program:
1.
Click on the
AVT200HD.exe
icon
(shown at right)
in the Extron Electronics group or folder in the
Start
menu. You can access this icon by selecting
Start
>
All
Programs
>
Extron
Electronics
>
AVT
200HD
>
AVT
200HD
.
After a few seconds, the Communication Setup window opens, in front of the
control program main window.
Figure 38.
Communication Setup Window with Telnet Tab
2.
On the Communication Setup screen, select the tab for the desired connection and
enter the requested information:
•
Telnet
(shown above):
For an IP connection over Telnet, enter the IP address for
your AVT, the Telnet port number (23 is the default), and the password if one has
been set.
NOTE:
If your local system administrators have not changed the value, use the
factory-specified default address,
192.168.254.254
, in this field.
