background image

AXP 64 C AT • DSP Configurator Configuration

17

 Accessing the DSP Configurator Help File

DSP Configurator comes loaded with a context-sensitive help file that can be accessed by 
clicking the help icon (

) in the top right corner of any dialog box in DSP Configurator.

Alternatively, click 

Help > Contents

 in the menu bar at the top of the main workspace, 

or press 

<F1>

 on your keyboard. This help file contains detailed procedures and further 

instruction on all DSP Configurator features.

DSP Configurator Main Workspace

NOTE:

  For details about specific software features and device configurations, refer to 

the 

DSP Configurator Help File

.

The DSP Configurator main workspace contains various functions to configure the 
AXP 64 C AT (see figure 15). Use the expand and collapse buttons (      ) next to the input 
and output group names to show or hide input and output groups and their corresponding 
mix matrices. If necessary, scroll through the window by using the mouse wheel or the scroll 
bar at the right side of the DSP Configurator main workspace.

A

 

Menu bar

E

 

Outputs

B

 

Inputs

F

 

Output filter controls

C

 

Input gain controls

G

 

AT outputs (pre-processed) 

D

 

Input filter controls

H

 

AT outputs (post-processed)

Figure 15. 

AXP 64 C AT DSP Configurator Program Main Screen

15 

 

Summary of Contents for AXP 64 C AT






















































Reviews: