AXP 64 C AT • Dante Configuration and Operation
29
Finding a Dante Device IP Address
To find the IP address of a Dante device, the name of the device is needed (see
the AXP 64 C AT in Dante Controller
NOTE:
If the AXP 64 C AT has not been renamed, its default name consists of the
product name followed by a hyphen, plus the last 6 digits of the device MAC address
(for example,
FOX3AT-1b6c78
).
Figure 24.
Device Info Page
1.
Open Dante Controller.
2.
On the
Dante
Controller-Network View
screen, click the
Device
Info
tab (see
1
).
3.
On the
Device
Info
page, locate the name of the AXP 64 C AT in the
Device
Name
column (
2
). The IP address is located in the
Primary
Address
column (
3
). In
figure 24, the IP address for the connected AXP 64 C AT is
192.168.254.254
.
Dante Controller Operation
Dante Transmitters and Receivers
A Dante network is comprised of transmitters that output digital audio onto the Dante
network and receivers that receive digital audio input from the Dante network.
•
Transmitters output digital audio from the device onto the audio network.
•
Receivers take in digital audio from the audio network into the device.
AXP 64 C AT Transmitters and Receivers
In the AXP 64 C AT, the line output and EXP output channels are Dante transmitters
because their audio output is transmitted onto the Dante network. Routing an analog
output to the Dante network allows the signal to be output on both analog and Dante
simultaneously, the same is true for the EXP outputs.
The AXP 64 C AT input channels are Dante receivers because they receive digital audio
signal from the Dante network that can then be routed and mixed into the AXP 64 C AT mix
AXP 64 C AT.
24
Summary of Contents for AXP 64 C AT
Page 6: ......