![background image](http://html.mh-extra.com/html/extron-electronics/da2-hd-4k/da2-hd-4k_user-manual_2455143033.webp)
Input/Output Configuration
This menu allows the user to configure the active input and outputs (see figure 12).
Figure 12.
Input Configuration Menu
Input Configuration
Signal Presence
— Connection status icon shows green when an active HDMI signal is
present.
HDCP Status
— The HDMI input negotiates and authenticates HDCP with the source device
if the source requires HDCP encryption.
HDCP Authorized
— Select this to turn the HDCP Authorized on (default) or off. When
disabled (off) the DA HD 4K devices do not display content that requires HDCP, and display a
green screen.
Figure 13.
Output Configuration Menu
Output Configuration
Signal Presence
— Connection status icon shows green when an active HDMI signal is
present.
HDCP Status
— Indicates whether the display connected to the output is HDCP compliant.
Format
— Select this to set the HDMI output format. Choices are:
•
Auto — (based on sink EDID), default
•
DVI RGB 444
•
HDMI RGB 444 Full
•
HDMI RGB 444 Limited
•
HDMI YUV 444 Limited
•
HDMI YUV 422 Limited
Color Bit Depth
— Select this to set the color bit depth, either
Auto
or
Force 8-bit
HDCP Mode
— When enabled, the HDCP Mode can be set to either follow the current input,
or always encrypt the output. Choices are:
•
Follow Input
— Encrypts the output only when required by the selected input source.
•
Always Encrypt Output
— Always encrypts the output, regardless of the HDCP status
of the input source.
•
Follow Input
— Encrypts the output only when required by the input source. Use this
setting when DVI sink devices initially pass HDCP encrypted content, but intermittently
display a green HDCP notification screen after a power cycle or resuming from sleep
mode.
DA HD 4K Series • Configuration Software
27