![background image](http://html.mh-extra.com/html/extron-electronics/dvi-da-plus-series/dvi-da-plus-series_user-manual_2455157024.webp)
Extron USA - West
Headquarters
+800.633.9876
Inside USA/Canada
Only
+1.714.491.1500
+1.714.491.1517 FAX
Extron USA - East
+800.633.9876
Inside USA/Canada
Only
+1.919.863.1794
+1.919.863.1797 FAX
Extron Europe
+800.3987.6673
Inside Europe Only
+31.33.453.4040
+31.33.453.4050 FAX
Extron Asia
+800.7339.8766
Inside Asia Only
+65.6383.4400
+65.6383.4664 FAX
Extron Japan
+81.3.3511.7655
+81.3.3511.7656 FAX
Extron China
+400.883.1568
Inside China Only
+86.21.3760.1568
+86.21.3760.1566 FAX
Extron Middle East
+971.4.2991800
+971.4.2991880 FAX
© 2010 Extron Electronics. All rights reserved.
www.extron.com
Installation Checklist
Ensure that the input sources, the distribution amplifier and the output
displays are all turned off and all power sources and signal cables are
disconnected.
Mount the unit as described in “
Mounting
”, (see page 15).
Connect the cables (see “
Rear Panel Features
”, on page 4).
If required, configure the internal DIP switches to
disable EDID
(see
page 8) from certain outputs, to activate the
EDID Lock mode
(see
page 10), or to enable pre-emphasis (see page 11).
Plug in the
power supply
(see page 4).
Turn on the display devices.
Turn on the input devices (see “
Operation
”, on page 7).