background image

IR 452 • Setup and Operation

Setup and Operation, cont’d

2-12

IR 452 • Setup and Operation

 

2-13

 The 

following 

fi gure shows the buttons that become 

available when DVD mode is selected:

SYSTEM REMOTE

DVD

VCR

DVD

VCR

IR 452

Press this 
button first.

DVD control buttons on the IR 452

Controlling a VCR

To control a VCR using the IR 452, do the following:

1

Press the VCR button on the IR 452 to place the DVCM 50 
or MLC 52 in VCR mode.  (If it was already in VCR mode, 
this button has no effect.)

2

Press the VCR control buttons, the Channel buttons, or 
the TV/VCR button on the IR 452 to issue commands as 
desired.  

Selecting DVD or VCR mode

The DVD and VCR buttons on the IR 452 are different from its 
other buttons in that each contains a permanent mode switch 
command.  This command is sent to the DVCM 50, which 
activates its equivalent button, or to the MLC 52, which activates 
its programmed memory block, every time the button is 
pressed.  Regardless of any programming done to the DVD and 
VCR buttons on the DVCM 50, pressing these IR 452 buttons 
always causes the DVCM or MLC 52 to switch to the mode of 
the button that was pressed.

If the DVCM 50 or MLC 52 is in VCR mode and you press 
the IR 452's DVD button, the controller switches to DVD 
mode.  (If it was already in DVD mode, no switch occurs.)
If the DVCM or MLC 52 is in DVD mode and you press 
the VCR button on the IR 452, the controller switches to 
VCR mode. (If it was in VCR mode, no switch occurs.)

  If additional commands have been programmed on the 

DVCM 50's DVD or VCR button, these commands also 
are issued when the IR 452 DVD/VCR button is pressed.  

To issue a command from the IR 452 to a DVD player or a 
VCR, you must fi rst press the button to select the appropriate 
operating mode, as described below.

Controlling a DVD player

To control a DVD player using the IR 452, do the following:

1

Press the DVD button on the IR 452 to place the DVCM 50 
or MLC 52 in DVD mode.  (If it was already in DVD mode, 
this button has no effect.)

2

Press the DVD control buttons to issue commands as 
desired.  

Summary of Contents for IR 452

















Reviews: