Operation, cont’d
Matrix 50 Series Switchers • Operation
3-6
C
Press and release the input 5 button. The input 5 LED lights.
D
Press and release the output 3, output 4, and output 8 buttons. The output
3, output 4, and output 8 LEDs blink to indicate a tentative tie.
The entire set of ties can be canceled at this point by pressing and releasing
the Esc button. The Esc LED flashes once.
E
Press and release the Enter button. The input and output LEDs turn off.
The current configuration is now defined as video and audio input 5 tied to
video and audio output 3, output 4, and output 8.
Example 2: Adding a tie to a set of video and audio ties
See figure 3-4 and the following steps for an example in which a new video tie is
added to the current configuration on a 12x8 Matrix 50 switcher with audio.
1
1
2
2
3
3
4
4
5
5
6
INPUTS
ENTER
OUTPUTS
6
7
7
8
9
10
11
PRESET VIEW
ESC
ESC
VIDEO AUDIO
VIDEO
12
8
CONTROL
I/O
A
B
ENTER
E
C
C
1
3
8
4
5
C
D
B
B
F
LED key: = off, = on, = blinking,
= flash once
F
Press
Press
Press
Press
Press
Figure 3-4 — Example 2: Adding a video tie
A
Press and release the Esc button. The Esc LED flashes once.
B
To select video only for the tie, if necessary, press and release the Video and
Audio buttons until the Video LED lights and the Audio LED is off.
C
Press and release the input 5 button. The input 5 LED lights. If the steps in
Example 1 have been completed, the output 3, output 4, and output 8 LEDs
light to indicate ties created in Example 1.
D
Press and release the output 1 button. The output 1 LED blinks to indicate
a tentative tie.
E
Press and release the Enter button. The input and output LEDs turn off.
The current configuration is now video input 5 tied to video output 1,
output 3, output 4, and output 8; and audio input 5 tied to audio output 3,
output 4, and output 8.
Example 3: Removing a tie from a set of video and audio ties
See figure 3-5 and figure 3-6 and the following steps for an example in which an
existing audio tie is removed from the current configuration on a 12x8 Matrix 50
switcher with audio.
A
Press and release the Esc button. The Esc LED flashes once.
B
To select audio only for the tie, if necessary, press and release the Video and
Audio buttons until the Video LED is off and the Audio LED lights.
Summary of Contents for Matrix 50 Series
