5
NAV 10E 501 and NAV 10E 101 • Setup Guide (Continued)
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
*
* NAV 10E 501 only
Figure 5.
HTML Page
NOTE:
Detailed descriptions of communication, configuration, and monitoring are provided in the
NAV 10E 501 and
NAV 10E 101 User Guide
.
Connection settings
View and change connection settings as follows:
1.
On the home page, click
Settings
(see figure 5,
1
) and then
Network
Connection
(
2
). The
Network
Connection
pane opens (see figure 6),
showing protected views of the network connection settings.
NOTE
:
Editing of connection settings is disabled when the
device is assigned to an Extron NAVigator System Manager.
2.
To change the settings
, click
Edit
(see figure 6,
1
). The
Edit
button
changes to
Save
.
3.
Click in the desired field (
2
) and edit it as necessary.
4.
Repeat step 3 as necessary for other values.
5.
Click
Save
.
Pairing devices via front panel
Pair devices as follows:
AV 10E 101
ID
A
AV
AV
V
V
V
V
1.
Use a Tweeker or other small screwdriver to press
and
hold
the
encoder
front panel
ID
button for
approximately 3 seconds, until the ID LED blinks. The
encoder enters pairing mode, which allows decoders
to receive the AV stream (NAV 10E 101) or AV and USB
streams (NAV 10E 501 only) from encoders.
2.
One at a time, use a Tweeker or other small screwdriver to press and
hold
the
decoder
front panel
ID
button for approximately 3 seconds, until the
ID LED blinks three times. The decoder is now paired to the encoder.
3.
Repeat step 2 for each decoder.
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
*
* NAV 10E 501 only
Figure 6.
Network Connection Pane
