PMK 450 Installation Notes, cont’d
PMK 450 Projector Mounting Kit • Installation Notes
PRELIMINAR
Y
©
©
2007 Extron Electronics. All rights reserved.
Extron Electronics, USA
1230 South Lewis Street
Anaheim, CA 92805
800.633.9876 714.491.1500
FAX 714.491.1517
Extron Electronics, Europe
Beeldschermweg 6C
3821 AH Amersfoort, The Netherlands
+800.3987.6673 +31.33.453.4040
FAX +31.33.453.4050
Extron Electronics, Japan
Kyodo Building, 16 Ichibancho
Chiyoda-ku, Tokyo 102-0082
Japan
+81.3.3511.7655 FAX +81.3.3511.7656
Extron Electronics, Asia
135 Joo Seng Rd. #04-01
PM Industrial Bldg., Singapore 368363
+800.7339.8766 +65.6383.4400
FAX +65.6383.4664
www.extron.com
9.
Insert the lugs on the bottom plate into the slots
on the top plate and
slide the bottom plate into
position
(Figure 4).
10
.
Lock the top and bottom plates together with
the security screws
, pass the AC power cord
through the slot at the rear of the top plate.
11.
Reattach the front and rear plates
(Figure 5).
Lugs (4)
Slots (4)
Figure 4 — Attach bottom plate
Specifications
Dimensions .................................... 2.25" (5.72 cm) H x 12.25"
(31.12 cm) W x 11.63" (29.53
cm) D
Mount application ......................... Mounts to
standard 1.5"
(3.8 cm) NPT pipes or pipes
with external diameters of
1.85" (4.7 cm) to 1.95" (5 cm)
Material ....................................... White powder-coated
aluminum
Maximum load` ............................. 15 lb (6.8 kg)
Product weight .............................. 2.35 lbs (1.07 kg)
Shipping weight ............................ 3 lb (1.36 kg)
Listings............................................ UL, CUL as an accessory, for
use with UL listed mount and
projector
Compliances ................................... CE
Vibration ......................................... ISTA 1A in carton (International
Safe Transit Association)
Warranty ......................................... 3 years parts and labor
11.63"
(295.30 mm)
12.25" (311.15 mm)
2.32" (59.00 mm)
2.00" DIA (50.80 mm)
11.63" (295.30 mm)
Figure 6 —
Dimensions
Figure 5 — Attach front and rear plates
FRONT
REAR
Rear Plate
