ShareLink Pro 500 • Operation Using a Computer
18
1
Device Info
— Use this panel to change the device hostname. Click
Edit
to enter a
new hostname, and click
Save
.
2
Device Status
— Click
Edit
to change the device time, date, and time zone. Click
Sync to
PC
to automatically sync the device to the PC time zone.
3
Firmware
— Use this panel to update the device firmware:
1.
Click
Select File
to browse to the firmware file.
NOTE:
The latest firmware file can be downloaded from the Extron website (see
on page 48).
2.
Select the firmware file, and click
Update
.
4
Network Settings
— Click
Edit
to change the device name and the network settings
(IP address, subnet, and gateway IP address) for the LAN port.
5
Roles and Permissions
— Click
Edit
to change the following passwords:
NOTE:
The factory configured password for all accounts have been set to the
device serial number. Passwords are case sensitive. Performing a
(see page 7) sets the password to the defaults shown below.
•
Admin password
(default:
extron
) — This password is used for accessing the
admin page.
•
Moderator password
(default:
moderate
) — This password is required to
moderate a session.
•
Participant password
(default:
no password
) — This password is required to
participate in a session.
Enter and confirm the new password, and click
Save
.
6
LinkLicense
— Use this panel to upload the LinkLicense file to the
ShareLink Pro 500. If a LinkLicense has been purchased, upload the file as follows:
a.
Click
Select File
and browse to the LinkLicense (
.ell
) file on your computer.
b.
Select the file, and click
Add
to upload the file.
Summary of Contents for ShareLink Pro 500
Page 2: ......