ShareLink Pro 500 • SIS Configuration and Control
43
Command
ASCII Command
(Host to Device)
Response
(Device to Host)
Additional Description
Reboot
Reboot device
E
1BOOT
}
Boot1
]
Reset
Reset to factory defaults
E
ZXXX
}
Zpx
]
Reset all device settings to default
values, but retain user-loaded files
and IP settings.
NOTE:
This reset mode does not affect passwords and IP related settings such as IP address, subnet
mask, gateway address, DHCP setting, and port mapping.
Erase all files from flash
memory
E
ZFFF
}
Zpf
]
Erase all files from flash (user)
memory.
NOTE:
This reset only removes files created in the user space, which includes those created by the backup
and restore functions, software configuration tools, image captures, user logo files, and other
user-supplied HTML files. Files used by firmware for internal operations such as saving non-volatile
settings are not removed.
Absolute reset, retaining
IP settings
E
ZY
}
Zpy
]
Reset all device settings to default
values and delete user-loaded files,
but retain IP settings.
NOTE:
•
This reset removes all device settings, including the file system and passwords, but retains IP settings
such as IP address, subnet mask, gateway address, DHCP setting, and port mapping (Telnet, Web,
and direct access) in order to preserve communication with the device. This reset is recommended
after a firmware update.
•
Admin password resets to
extron
.
IP system reset
E
1ZQQQ
}
Zpq1
]
Reset IP settings only.
Absolute system reset
E
ZQQQ
}
Zpq
]
Reset all device and IP settings to
default values and delete user-
loaded files.
NOTE:
Admin password resets to
extron
.
Summary of Contents for ShareLink Pro 500
Page 2: ......
