StudioStation 100 • Web-Based User Interface
30
Web-based User Interface Help Files
The StudioStation 100 Web-based User Interface contains an extensive set of help
files to assist with the connection, configuration, monitoring, and operation of the
StudioStation 100. To access the help files, click on the question mark (
?
) in the upper right
corner of the web page (see figure 10).
Accessing the Web-Based User Interface
To access the embedded web page user interface, connect a control PC to the LAN port of
the StudioStation 100, or to the same network shared by the StudioStation 100, and open
a Web browser. Enter the IP address of the StudioStation 100 (the default IP address is
192.168.254.253
) into the browser address field. If necessary (if the unit has already been
configured), enter the
username
and
password
to log in, then click
Log
In
or
OK
.
The main user interface opens to the
Device
Status
Figure 10.
StudioStation 100 Series Main User Interface
Page Overview
The StudioStation 100 pages are organized by function and further organized within those
main functions. Click the tabs to open the pages.
Tabs
The pages in the StudioStation 100 are grouped within six main tabs at the top of the
screen:
1
2
3
4
5
6
Figure 11.
Six Main Function Tabs
figure 10
figure 11
