Sleep timer
The
Sleep Timer
can be toggled between
On
and
Off
.
•
If the sleep timer is
On
, after a period of inactivity, the screen goes dark to save power
(Sleep mode). Use the up and down arrows to set how long the period of inactivity should
be. The value can be between 1 and 120 minutes.
•
If the sleep timer is
Off
, the panel does not enter sleep mode.
Display timer
The
Display Timer
can be toggled between
On
and
Off
. If it is
On
, it determines how long the
panel is inactive before the output sync is disconnected.
•
To deactivate the display timer, click
Off
. The controls for the
Display
Timer
are grayed
out.
•
To set the display timer, ensure the function is activated by clicking
On
. Adjust the time.
The value can be between 1 and 120 minutes.
NOTES:
•
When the sleep timer is used to deactivate the screen, the screen goes dark, which
provides partial energy savings. The screen reactivates quickly when it is touched.
•
When the display timer is used to deactivate the screen, the output sync is
disconnected and the screen switches off. This provides better energy savings but the
screen takes longer to reactivate when it is touched.
Test patterns
The TLI Pro 101 provides eight test patterns, which can be used to
calibrate the third-party touchpanel display. Click the
Show
button to
open the test pattern menu.
Color Bars
Crosshatch
Crosshatch 4x4
Grayscale
Crop
White Field
Alt Pixels
Ramp
When pattern is open:
Swipe screen for next pattern.
Tap screen to exit.
Exit
Figure 14.
Test Pattern Menu
1.
Select the test pattern you need by pressing the icon.
2.
Swipe the screen from left to right to show the previous test pattern or swipe the screen
from right to left to show the next test pattern.
3.
Touch any part of the screen to show the menu box.
4.
Click
Exit
to close the
Test
Patterns
dialog and return to the
Output
window.
Show
Test Pattern
TLI Pro 101 • On-screen Menus
17
Summary of Contents for TLI Pro 101
Page 7: ...TLI Pro 101 Contents vii ...
