6
© 2018 Extron Electronics All rights reserved. All trademarks mentioned are the property of their respective owners.
www.extron.com
TLP Pro 525M, 725M, and 1025M Series • Setup Guide (Continued)
Reset Modes: a Brief Summary
These touchpanels provide the following reset modes (see the
TLP Pro 525, 725, and 1025 Series User Guide
for complete
information):
•
Use Factory Firmware
— With the unit powered off, press and hold the
Reset
button (see
figure 4
,
B
on the previous page
)
while reapplying power to the unit. Use this mode with Toolbelt software to replace firmware in the event of conflicts arising
from uploading a firmware update.
•
Reset All IP Settings
— Press and hold the
Reset
button for 6 seconds. After the Reset LED (
C
) flashes twice, release and
momentarily press the
Reset
button. Use this mode to reset all network settings without affecting user-loaded files.
•
Reset to Factory Defaults
— Press and hold the
Reset
button for 9 seconds. After the Reset LED flashes three times,
release and momentarily press the
Reset
button. Use this mode to return the touchpanel to factory default settings.
Reset Modes
Status
Display
Audio
Advanced
Exit
Network
Info
Model:
TLP Pro 725M
Part Number: 60-1563-02
Firmware
Version:
1.02.0001-b001
Network
IP Address:
DHCP:
Host Name:
Off
192.168.254.251
TLP-AB-CD-EF
Display
Resolution:
GUI Project:
Sleep Timer:
1024x600
N/A
5 Minutes
Audio
Master Volume:
Master Mute:
Off
99
Advanced
Controller IP:
N/A
Project Size:
N/A
Bootloader
Version:
1.03.0000
Figure 6.
Setup Menu: Status Screen for TLP Pro 725M
Setup Menu
Figure 6 shows the Status screen for the TLP Pro 725M. The
screen for the TLP Pro 525M or TLP Pro 1025M are similar.
Press the
Menu
button (
figure 4
,
A
) to open the setup menu.
Select any of the five available screens (
Status
,
Network
,
Display
,
Audio
, and
Advanced
) by pressing the appropriate
button in the navigation bar at the top of the screen (for more
information, see the
TLP Pro 525, 725, and 1025 Series User
Guide
).
68-2831-53 Rev. A
07 18
