Connecting a Power Injector
Figure 4 shows the Extron XTP PI 100. Your power injector may look different.
1.
Connect a straight-through Ethernet cable from the power injector to a switch or router
(figure 4,
1
). This cable carries network information from the switch or router to the
power supply.
100-240V
~
50-60Hz
0.4A MAX
XTP
PWR
XTP PWR
To network switch
To touchpanel
1
1
1
2
2
2
3
3
3
Figure 4.
XTP PI 100 Power Injector
2.
Connect a second straight-through cable (
2
) from the power injector to the touchpanel.
This cable carries the network information and 48 VDC from the power injector to the
touchpanel.
3.
Connect the IEC power cord to a convenient 100 VAC to 240 VAC, 50-60 Hz power
source (
3
).
TLP Pro 300M • Panel Features
7
Summary of Contents for TouchLink TLP Pro 520M
Page 6: ......
