Peripherals tab
To access the
Peripherals
tab, you must first select a device from the
Device
tab opens, click the
Peripherals
tab. Whether
you navigate to the
Peripherals
tab from an encoder or a decoder, the functionality is the
same.
Figure 26.
Peripherals Tab
The Peripherals screen is used to manage the Coms pass-through serial port and the
mouse+keyboard forwarding operation.
RS-232 pass-through serial port
The RS-232 pass-through serial port supports two modes of operation:
•
Serial RS-232 pass-through mode
•
Serial RS-232 data channel mode
In either mode, the serial ports on each VNM 250 do not need to share a common baud
rate. However, where large amounts of data are sent from a high-speed to a low-speed data
link, some form of handshaking or flow control may be required to prevent buffer overflow
on the output device. Standard flow control methods are fully supported.
figure 26
VNM 250 • VNM 250 GUI Overview
42
Summary of Contents for VN-Matrix 250 Series
Page 6: ......
