Decode Config Submenu
The
Decode
Config submenu allows you to:
•
Select a stream.
•
Enable
or
Disable
the splash screen.
Decode
MENU
NEXT
Select Stream
[Available streams]
NEXT
NEXT
Splash
[enable]
Select
None
or
choose from list of
available streams
Figure 85.
VND 250 Decoder Decode Config Submenu
1.
In the main
Decode
screen, press
Next
to open the
Select
Stream
screen.
2.
Use either rotary encoder to select
None
or choose one of the streams that is available
on the network.
3.
If you have selected a stream, press
Next
to save the selection and return to the main
Decode
screen. Go to step 6.
If you selected
None
or the selected stream is not currently available, press
Next
to
open the
Splash
Screen.
NOTE:
If a stream was selected and that stream is currently available, the
Splash
screen is not available.
4.
If the
Splash
screen is open, use either rotary encoder to toggle between
Splash
enable
and
Splash
disable
:
•
Select
enable
to show the splash screen.
•
Select
disable
to show a frozen screen capture of the last frame displayed.
5.
Press
Next
to return to the main
Decoder
Config
screen.
6.
Press
Menu
to open the main
OSD
screen.
VNM 250 • Front Panel Menu Configuration
103
Summary of Contents for VN-Matrix 250 Series
Page 6: ......
