Output Submenu
The
Output
submenu allows you to:
•
Enable
or
Disable
decoding
•
Set
Power
save
to
Active
or
Inactive
•
Scale the output resolution
NEXT
Output
[Enable]
NEXT
NEXT
Power save
[Active]
Scale mode
[None]
Output
MENU
Select: Enable
Disable
Test
Standby
Select: Active
Disabled
Select: None
Display
User
Scale mode
[None]
Scale mode
[Display]
Scale mode
[User]
NEXT
NEXT
NEXT
Scale None
[Output Resolution]
Aspect Ratio
[Fill/Follow]
Set output res
[List of modes] [Refresh]
NEXT
NEXT
NEXT
Figure 88.
VND 250 Decoder Output Submenu
1.
In the main
Output
screen, press
Next
to open the
Output
submenu.
2.
Use either rotary encoder to select
Enable
(normal operation),
Disable
(stream
decoding is suspended), or
Test
(stream decoding is suspended and replaced by a test
pattern).
NOTE:
Changing the mode in this menu resets the
Power
save
timeout.
3.
Press
Next
to open the
Power
save
screen.
4.
Use either rotary encoder to toggle between power save
Active
or
Disabled
.
NOTES:
•
When power save is
Active
, after 5 minutes with no active stream, the
output sync is dropped to allow a locally connected monitor to enter power
save mode.
•
When power save is
Disabled
, sync is available at all times.
5.
Press
Next
to open the
Scale
mode
screen.
VNM 250 • Front Panel Menu Configuration
107
Summary of Contents for VN-Matrix 250 Series
Page 6: ......
