VoiceLift Pro Microphones User Guide • SIS Configuration and Control
27
Commands and Responses
Using the Command and Response Table
Command and Response Table for SIS Commands
on page 28 lists the following:
•
Valid ASCII command codes
•
The receiver responses to the host
•
A description of the command function, or the results of executing the command
The ASCII to hexadecimal conversion table below is for use with the command and
response table:
ASCII to Hex Conversion Table
•
Space
Upper- and lowercase characters can be used interchangeably in the command field unless
otherwise specified.
Symbol Definitions
]
= Carriage return and line feed (
LF
)
}
= Carriage return with no line feed
| = Pipe (can be used interchangeably with the
}
character).
•
= Space
E
= Escape key
W
= Can be used interchangeably with the
E
character.
X@
= On and Off status
0
= off/disable/open (default)
1
= on/enable/closed
X#
= Firmware version number
X$
= Verbose mode
0
= disabled
1
= verbose mode (default)
2
= tagged responses for queries
3
= verbose mode and tagged responses for queries
X%
= Pulse time in
256
ms counts
If parameter is missing or =
0
, then the pulse length is default =
2
=
512
ms.
Max =
255 65280
ms ≈
65
seconds
X&
= Relay
1
= Relay 1
2
= Relay 2
X*
= Chime
0
= Off
1
= On (default)
Summary of Contents for VoiceLift Pro VLS 3001
Page 8: ...viii ...
