WPB 103B and WPB 107B Wall Plates • Installation
Final Installation
After testing the wall plate and adjustments, carefully insert the
wall box into the opening, and attach it to the wall, stud, or
furniture with nails or screws, leaving the front edge flush with
the outer wall or furniture surface. See the illustration below.
Wall opening
flush with
edge of box
Installation
Cable
Cable Clamp
Screws or Nails
Wall Stud
If attaching the wall box to wood, use four #8 or #10 screws or
10-penny nails. A minimum of ½ inch (1.3 cm) of screw threads
must penetrate the wood.
If attaching the wall box to metal studs or furniture, use four
#8 or #10 self-tapping sheet metal screws or machine bolts with
matching nuts.
Attaching a wall box to a wall stud
5
im Vertrieb von
CAMBOARD Electronics
www.camboard.de
Tel. 07131 911201
Fax 07131 911203
ce-info@camboard.de
