background image

 

 

 

 

Extronics Limited

  

1 Dalton Way, Midpoint 18, Middlewich, Cheshire, UK. CW10 0HU 

Tel: 

+44 (0) 845 277 5000  

Fax: 

+44 (0)845 277 4000  

E-mail: 

info@extronics.com  

Web

www.extronics.com

  

 

 

            5  

If the handheld scanner is not used properly, the operating permission for hazardous areas may lapse 
for the device in question. 

Non-adherence to the instructions will void any warranty. 

 

For the full commission of the handheld scanner, the programming information contained 
in the manual issued by SICK AG (www.SICK.com) is also required.

 

 

 

2.3

 

General notes of caution 

 

 

Caution / Notes 
 

 

 

The devices may only be operated when fully assembled. 

 

In hazardous areas, the devices must not be wiped or cleaned with a dry 

cloth. 

 

The device must be switched off immediately if it is likely that it can no 

longer be operated safely as a result of damaging impact or general 

peculiarities (such as ingress of water or other fluids, temperatures outside 

of the specified range, etc.). 

 

General statutory requirements or health and safety rules and accident 

prevention guidelines and environmental laws must be adhered to (e.g. 

the German Occupational Health and Safety regulation). 

 

Users must not open the device. 

 

Users must not make any changes to the device. Components may not be 

exchanged or replaced. If non-specified components are used, explosion 

protection is no longer guaranteed. 

 

Ensure safe handling with firm footing and sufficient room for movement. 

 

If the enclosure is in any way damaged the device must be removed from 

the hazardous area immediately. 

 

In accordance with IEC 60079-19 and IEC 60079-17, operators of electrical 

installation in hazardous areas are obliged to have them serviced by 

qualified electricians. 

 

Do not insert any sharp objects into the enclosure or any other openings of 

the handheld barcode scanner. Any openings at the device may not be 

covered or blocked. 

 

The device and any accessories must be properly disposed of, i.e. as legally 

specified, for example by a certified company. 

Summary of Contents for iSCAN2 1 Series



















Reviews: