background image

 

 

 

 

Extronics Limited

  

1 Dalton Way, Midpoint 18, Middlewich, Cheshire, UK. CW10 0HU 

Tel: 

+44 (0) 845 277 5000  

Fax: 

+44 (0)845 277 4000  

E-mail: 

info@extronics.com  

Web

www.extronics.com

  

 

 

            4  

2.

 

Important notes on the operating instructions 

 

2.1

 

Safety information 

 

Warnings are highlighted by a special symbol and a different font colour: 

 

 

Danger

 

Non-compliance may result in life-threatening situations. 
This warning must be heeded.

 

 

 

Warning 

This type of warning concerns dangerous situations that may result in minor injuries. 

 

Info

 

Important and helpful notes and information.

 

 

 

2.2

 

Notes on the operating instructions 

 

Before starting up the equipment please read the Manual thoroughly. 

The Operating Instructions contain important information on functionality as well as safety rules. 
If these are not heeded, normal operations within hazardous areas cannot be guaranteed.

 

The notes contained in this manual are important for starting up and operating the product. 

These instructions may be updated at any time. Extronics Limited reserves the right to make changes 
to this document. Before they use the product, users must ensure that they have the most up-to-

date version of the operating instructions. To make sure this is the case, please check Extronics’ 

website, www.extronics.com, or contact one of the company's staff. 

The drawings contained in these operating instructions are for illustration purposes only and may 
differ somewhat from the actual design. 

 

No  changes  may  be  made  to  the  device  that  were  not  intended  or  approved 
by Extronics Limited. 

 
 

 

 

Summary of Contents for iSCAN2 1 Series



















Reviews: