USB-MUXDIAG-II – User guide
16/05/2012
00283735-v1
4
Document confidentiel appartenant à Annecy Electronique S.A.S.
Ne peut être diffusé, copié intégralement ou en partie sans autorisation expresse préalable
1.
Document’s purpose and bibliography
1.1.1.
Purpose
The purpose of this document is to give the user the information required to install and set
up the DLx-MUXDIAGII interface with datalogger function.
1.1.2.
Bibliography
ISO 11898
Road vehicles – Interchange of digital information – Controller Area
Network (CAN) for high-speed communication
ISO 11519-2
Road vehicles – Low-speed serial data communication – Part 2: low
speed controller area network (CAN)
ISO 9141
Véhicules routiers – Systèmes de diagnostic – Caractéristiques de
l’échange de données numériques
ISO 9141-2
Véhicules routiers – Systèmes de diagnostic – Caractéristiques CARB de
l’échange de données numériques
ISO 14230-1
Véhicules routiers – Systèmes de diagnostic – Protocole KeyWord2000
– Partie 1: Couche physique
ISO 14230-2
Véhicules routiers – Systèmes de diagnostic – Protocole KeyWord2000
– Partie 2: Couche liaisons de données
ISO 14230-3
Véhicules routiers – Systèmes de diagnostic – Protocole KeyWord2000
– Partie 3: Couche application
ISO 15765-1
Road vehicles – diagnostics on CAN – Part 1: General information
ISO 15765-2
Road vehicles – diagnostics on CAN – Part 2: Network layer services
ISO 15765-3
Road vehicles – diagnostics on CAN – Part 2: Application layer
ISO 15765-4
Road vehicles – diagnostics on CAN – Part 4: Requirements for
emission related systems
ISO 11519-4
Véhicules routiers – Communication en série de données à basse
vitesse – Partie 4: interface de communication de données de type B
(SAE J1850)
SAE J1979
E/E Diagnostic Test Modes (Décembre 1991)
SAE J1962
Diagnostic Connector (Juin 1992)
USB
Universal Serial Bus Specification, Version 1.1, Copyright © 1998
Universal Serial Bus Specification, Revision 2.0, Copyright © 2000