background image

 

10

The MIC user interface will remember the last adjustment settings when the system is closed and 
re-opened, but you may have several formats of microfilm that requires different setting for 
optimum performance, note these settings and keep them close to system for reference. 

Video Resolution 

     

Video resolution is optimum at 2592x1944 (5MP). 

Adjusting to the next setting down 

2048x1536 (3MP) will provide a faster refresh rate ( less latent movement of image) and 
almost the same scan / print result 

so try that setting if you prefer a faster refresh rate when 

searching for images.   

After image is located, the Video Resolution can be maximized with the slider in an instant. All 
digital microform viewer/scanners have a measure of image latency which gets a little getting 
used to. After several uses you will become accustomed to the operation of the unit. 

 

 

 
 
 

 

Install  Snagit  Software,  check  all  boxes  during  install,  accept 
license  agreement,  check  30  Day  Eval  (A  full  license  code  is 
provided on the DVD label for future use).  
 
Snagit  will  launch  after  installed  so  review  the  following 
section  to  set  up  Snagit  for  optimum  functionality,  speed  and 
ease of use. 

 
 
 

Summary of Contents for Micro-Image Capture 2




















Reviews: