17
Every Micro-Image Capture unit goes through a quality assurance tests
that check for proper focus and resolution quality as well as mechanical
build and fitment.
We use both negative and positive film in low and high magnification
ranges to insure the unit meets our quality standards prior to packaging
for shipment. A print sample from a capture is included with each unit
and contains the unit serial # and calibration settings used to achieve
that particular scan/print.
Safety precautions
Observe the following guidelines to ensure that your Micro-Image Capture 2 will
operate safely and to prevent defects.
• Do not use this device in environments outside the
following range: temperature: 0°C to 40°C, relative humidity:
45% ~ 85%.
• Do not use this device under:
– direct sunlight exposure;
– very humid and dusty environment;
– near any kind of heat or vibration sources
• Do NOT attempt to disassemble or repair your Micro-Image Capture 2 by
yourself. Do not open the camera housing as this will void the warranty.
• Protect the device from oil, vapors, steam, moisture, and dust.
