18
Mail Server:
Enter the host names or IP addresses for your mail servers in the fields
provided.
NOTE
If a host name is used, a valid DNS server must be specified in the Network-Basic settings.
Port:
Enter the SMTP server port number for the SMTP Server. The Port number can be
adjusted in the range 1-65535. The default setting is 25.
NOTES
- If your mail server requires authentication, click the Use (SMTP) authentication checkbox
for use authentication to log in to this server.
- Please consult with your network administrator, if you want to change the port number.
Use (SMTP) authentication:
If your mail server requires authentication, click the Use
(SMTP) authentication checkbox for use authentication to log in to this server.
User name:
Enter the User name as provided by your network administrator.
Password:
Enter the Password as provided by your network administrator.
Login method:
Select one for SMTP authentication method allowed.
NOTES
- If a PLAIN or LOGIN mechanism is negotiated, the camera sends user name and password
to the SMTP server.
- The LOGIN mechanism is supported by Microsoft, as well as by some other clients. Most
other clients support the PLAIN authentication mechanism.
- Since the vast majority of Email clients support
only
PLAIN or LOGIN, mail server
administrators will probably want to consider using STARTTLS to provide an encryption
"tunnel" between the client and server, to protect the user name and password.
Receiver List:
Enter the recipient’s email address as the receivers.
Receiver1~8:
Enter the recipient’s email address as the receiver to test.
E-Mail(SMTP) Test:
Enter the recipient's email address and click the Test button to
test that the mail servers are functioning and that the email address is valid. When the
setup is complete, the connection can be tested by clicking the Test button.
Receiver:
Enter the recipient’s email address as the receiver to test.
Summary of Contents for D SERIES
Page 1: ...1 IP CAMERA USER Manual ...
