Compatibility
Make sure that each item in an assembly can be used together and
work as a system. Compatibility needs to be checked prior to use.
Check individual manuals for each item and see if they can be used
together.
Safe use
When working at height or other related activities such as rope access:
never rely on a single piece of equipment always make sure you have
an equal redundant back-up system.
Multiple Loading
Do not subject the hook to multiple forces, which could cause hook
body deflection resulting in gate failure.
Adding a connector to the stitched loop.
Do not clip in an extra connector, as the stitching won’t hold!
Sharp edges should be avoided at all times. If it cannot be avoided
proper precautions should be taken.
Do not fall into the slings directly without any energy absorbance.
Minimize a fall at all times, check your fall factors and the equipment
your using to see if it can survive the impact. See drawing on fall
factors.
Caution when there is a potential swing fall. A swing fall occurs when
an anchor is not directly above the worker and when occurs can cause
serious injury or death.
Use in extreme environment
Use of any PPE in extreme environments can be dangerous. It is
important to do appropriate testing before the use of our products
in environments such as extreme cold or high temperatures (working
temperatures are -30 degrees up to 60 degree Celsius), chemicals,
dust, sand and other foreign materials, electrical power, grinding and
chafing should be avoided, if you have any questions contact us and
we can help you determine the effects.
Inspection
An examination should be carried out before the product is put into
service.
Periodic examinations should takes place at least once a year, taking
into account factors such as legislation, equipment type, frequency of
use, and environmental conditions.
A periodic exam should be carried out by a competent person.
For complex items such as self retractable lifelines please contact us
for further details.
Before each use visually inspect to ensure the product is in serviceable
condition and operates correctly. If any compromises are found do not
use the product and retire it.
If the product has been used to arrest a fall, withdrawn from use
immediately! Do not use again until, in writing, a competent person
says it is acceptable for use. If not acceptable the product should be
destroyed.
A pre-use check by the user may not be applicable if the user is
under supervision of a competent person or in the case it is used for
emergency use which have been pre-packed or sealed by a competent
person.
When carrying out an inspection pay attention to the following items:
Check the label / marking (visible, legible, age)
Check webbing (cuts, burns, wear, chemical marks, crushed, other
damage)
Check stitching (cut, worn, coloured or disordered threads)
Check attachment points (deformation, cracks, wear, corrosion, marks)
Check O-ring and connectors (deformation, cracks, wear, corrosion,
marks)
Check compatibility of connector
Check condition of protective components
EN
Personal protective equipment against falls from a height.
General requirements for instructions for use, maintenance, periodic
examination, repair, marking and packaging as per EN 365:2004
Thank you for using an Eyolf product. We have done everything possi-
ble to ensure that the information provided in this manual is accurate
at the time of publication. However, we do not guarantee that this
information will remain up to date, as many products and techniques
change over time.
Mountaineering, climbing, caving, working at height and other related
activities are inherent dangerous due to outside factors and hidden
risks. Not understanding, taking precautions and eliminating these
risks can lead to serious injuries and death.
If in doubt do not use the product!
Contact us if you have any questions or concerns.
This harness is to be used for fall protection only, which include fall
arrest and travel restraint. If a waist belt is present it can also be used
for work positioning when both side D-rings are used.
Warning
Medical condition
It should be understood that working at height and the use of equip-
ment to do so, involves a certain amount of physical and mental
exertion. Certain medical conditions are a definite contra-indication to
the safe use of the equipment and working at height.
Training
Training and assessment of competency are essential before use of
this product.
Users must be aware of the limitations, precautions and the dangers
of misuse.
Risk assessment - rescue plan
A risk evaluation and a quick response rescue plan should be in place
prior to any activities at height.
For instance that, if the risk assessment carried out before the start of
work shows that loading in the case of a use over an edge is possible,
appropriate precautions should be taken.
Also to deal with any emergencies that could arise during the work/
exercise. Relying upon a local emergency rescue team is not a rescue
plan and could get you in severe trouble as they might not be capable
or take too long to perform a rescue.
Have a suitable rescue plan in place!
Repairs
Do not make any alternations or additions to the product without the
manufacturer’s prior written consent. Repairs shall only be carried out
in accordance with manufacturer’s procedures.
Without consent any repair or alterations should be done by the man-
ufacturer.
Intended use
The product has been tested for specific use, do not use the product
other than indicated without the consent of the manufacturer.
PPE
PPE stands for Personal Protective Equipment and in case of this prod-
uct this means it should be provided to an individual user.
Strengths
Strengths quoted are when the product is tested new and are in ac-
cordance with the manufacturers test methods or to the appropriate
standard. Any weights and measurements are approximate.
