Supervision
Under certain circumstances where a person is temporarily
using a PPE against falling a competent and/or trained person
could supervise the user.
Read the manual and keep it
Keep the user instructions/information accessible as a perma-
nent record on- and off-site. Keep a copy of the manual with the
product at all times.
Warranty
Equipment offered by Eyolf Inc. are warranted against factory
defects in workmanship and materials for a period of three
years from date of installation or use by the owner, provided
that this period shall not exceed three years from the date of
manufacturing (see label on product). Upon notice in writing,
Eyolf Inc. will promptly repair or replace all defective items.
Eyolf Inc. reserves the right to elect to have any defective item
returned to its plant for inspection before making a repair or
replacement. This warranty does not cover equipment
damages resulting from abuse, damage in transit, or other
damage beyond the control of Eyolf Inc. This warranty applies
only to the original purchaser and is only one of applicable to
Eyolf products, and is lieu of all other warranties, expressed or
implied.
Eyolf Inc.
191 Gregson Court
Fergus ON
N1M 2W8 CANADA
Tel: +1 519 787 1581
Email: info@eyolf.ca
Web: www.eyolf.ca
Document: B50 Tak Prusik Loop rev1
PPE Inspection form
How to inspect your ropes.
Doc: Inspection form - Ropes Rev: 9 - Date: 2017-10
Copyright 2017 - Eyolf Inc
If there is any doubt or failure, the harness
should not be used.
Visual check of the safety components:
Readable labels present?
(Age of rope)
Check rope
(cuts, burns, wear, chemical marks, dents, coils, kinks, etc.)
Check stitching
(cut, worn, coloured or disorderd threads)
Check compatibility of connector
Check condition of protective components
(textile cover, pvc cover, thimble, etc.)
Operational check
Check hardware is in the right position
Check length with length on label
Check rotation and movement of moving parts
(must run freely)
Owner:
Style of rope:
In Service:
Serial #:
Date of first use:
Date of inspection:
Yes
No
Comments:
Check sewn end-termination
(overloaded, wear, cuts, other damages)
Check knot
(knot correct with application)
Check friction components
(wear patterns)
