PATHWAY HD Code Compliant Modular Access System Installation Manual
Page 41 of 92
5.3.5.
Loosen the elbow assembly screws and align the round faces of the adjustable
elbows, and then tighten the elbow assembly screws and joiner set screws enough to
hold them in position (FIG. 5.11).
5.3.6.
Measure the gap between the faces of the opposing rings of the 2-15/16” ring joiners
(FIG. 5.11).
5.3.7.
Cut the 1-
1/2″ diameter round tube to the length measured.
5.3.8.
Using a metal file, remove any sharp edges from cutting.
5.3.9.
Install the cut 1-
1/2″ diameter round tube between the 2
-15/16” ring joiners.
5.3.10.
To facilitate installation, remove and reinstall the adjustable elbow with threaded
insert from the platform angle post (FIG. 5.12).
5.3.11.
Tighten the adjustable elbow assembly screws and all 2-15/16” ring joiner set screws
securely.
FIG. 5.11
FIG. 5.12