EZ Answer
Length of entry = fixed 2 digits
Program # 142:
To listen to the currently programmed value for the Hook flash
duration,
You will hear: “ One Four Two (0.6 sec silence) One Three”
Program # 103:
To select the TRANSFER TYPE
EZ ANSWER
Supports 3 types of transferring an incoming call.
Type 0 - Semi supervised
Type 1 - Fully supervised
Type 2 - Blind mode
Semi supervised:
In this mode, the unit will transfer the call to
an extension, if that extension returns a ring signal. If that
extension is
busy
or invalid, the appropriate message is played
back to the caller.
Fully supervised:
In this mode, the unit will wait for the
extension to answer before transferring the incoming call. If
there is no answer from the extension, the unit will play back the
message
“ I am sorry, there is no answer from that room
”
and then allow the caller to dial 0 for the operator or hang up.
The number of rings that the unit will wait before deciding there
is no answer from the called extension will depend on the value
programmed under program # 206.
Blind mode:
In this mode, the unit will not check for `ring - no
answer', `busy', `re-order' signals from the PBX. The call will be
transferred as long as it is not part of the invalid extension list.
16
