EZ Answer
restarting, they will work as independent ports. However, to
change from `individual mode' to `common mode', you have to
call into each port separately and program the `common mode'
value of
`0'
in both ports. The `common mode' of operation will
come into effect only when both ports have been programmed
accordingly.
Default value =
0
Length of entry = fixed 1 digit
Program # 251:
To listen to the currently programmed value for the Operation
mode:
You will hear: “ Two Five One (0.6 sec silence) Zero”
Program # 300:
This program plays back all the voice messages stored in the
voice chip of the unit. These include all the default messages and
the main greeting.
If any digits are entered while the messages are being played,
the unit stops playing the messages and waits for the user to
enter the rest of the digits of the next program number.
Program # 301 to 321:
These programs will play back the individual messages that are
stored in the unit.
Program # 321 will play back the main greeting.
36