19
This is to comply with the U.S.A. Department of Defense (DoD 5220) standard to fully
erase the media by rewriting bit by bit seven times to guarantee the data to be permanently
deleted. It takes long time to erase, and the content will not be retrieved by software.
Use ▲or ▼ to select option Display progress status
Final result
3.9 Capacity Check
This command allows to verify the device capacity. It can detect the actual capacity of
devices within 3 seconds.
Display progress status Final result
3.10 Aging Test
Users can set the test function and test times for Aging test. There are 3 functions, Copy,
Compare, Copy+Compare, can be selected. Test times from 1 to 10,000 times can be
selected.
Use ▲or▼ to select test function.
Use ▲or▼ to select test times.
3.11 Media Information
This option displays the information of selected device media, such as total capacity, file
format and the size of data content.
Result: 1:20:30
Pass
：
7 Fail
：
0
DoD Erase
：
7
00:10 (03) 1%
[Utility]
8. 7-Pass DoD Erase
Sure to erase?
Yes
ENT
ENT
ENT
[Utility]
9. Capacity Check
Ready device: 8
C_Check
：
8
00:00 (00)
Result: 00:00
Pass
：
8 Fail
：
0
ENT
ENT
[Aging Test]
1 Times
[Utility]
10. Aging Test
[Aging Test]
Copy Active
